-
Title:
Enhancement of the in-plane shear properties of carbon fiber composites containing carbon nanotube mats
-
Contributors:
Kim, Hansang ( author )
-
Published in:
Metals and Materials International ; 21, 1 ; 185-193
-
Publisher:
The Korean Institute of Metals and Materials
- New search for: The Korean Institute of Metals and Materials
-
Place of publication:
Seoul
-
Publication date:
2015-01-01
-
Size:
9 pages
-
ISSN:
2005-4149, 1598-9623
-
DOI:
-
Type of media:
Article (Journal)
-
Type of material:
Electronic Resource
-
Language:
See AlsoHelp the larger cause · Give Nimona a 4K/Bluray Release! · Change.orgBailey Endeavour B62 Motorhomes for sale | Caravansforsale.co.ukCrotty / Crottie - NewbrunwickHelp the larger cause · STOP SPRAYING OUR SKIES · Change.orgEnglish
-
Keywords:
composites , carbon and graphite , nanostructured materials , mechanical properties , strength
Material Science , Metallic Materials , Operating Procedures, Materials Treatment , Magnetism, Magnetic Materials , Engineering Thermodynamics, Heat and Mass Transfer , Characterization and Evaluation of Materials , Continuum Mechanics and Mechanics of Materials
-
Source:
Springer Verlag
Table of contents – Volume 21, Issue 1
Show all volumes and issues
The tables of contents are generated automatically and are based on the data records of the individual contributions available in the index of the TIB portal. The display of the Tables of Contents may therefore be incomplete.
- 1
-
Kinetics of Fe2Al5 phase formation on 4130 steel by Al pack cementation and its oxidation resistance
Son, Y. I. / Chung, C. H. / Gowkanapalli, R. R. / Moon, C. H. / Park, J. S. et al. | 2015digital version print version
- 7
-
Thickness inhom*ogeneity in hardness and microstructure of copper after the compressive stage in high-pressure torsion
Song, Yuepeng / Wang, Wenke / Lee, Dong Jun / Jeong, Hyeok Jae / Lee, Sunghak / Kim, Hyoung Seop et al. | 2015digital version print version
- 14
-
Effect of applied potential on fatigue crack propagation behavior of Fe24Mn steel in seawater
Jeong, Daeho / Lee, Soongi / Seo, Insik / Yoo, Jangyong / Kim, Sangshik et al. | 2015digital version print version
- 22
-
Fatigue crack propagation behavior of Fe24Mn steel weld at 298 and 110 K
Jeong, Daeho / Lee, Soongi / Seo, Insik / Yoo, Jangyong / Kim, Sangshik et al. | 2015digital version print version
- 31
-
Cooldown-induced hydride reorientation of hydrogen-charged zirconium alloy cladding tubes
Won, Ju-Jin / Min, Su-Jeong / Kim, Kyu-Tae et al. | 2015digital version print version
- 43
-
Microstructural analysis of cracking phenomenon occurring during cold rolling of (0.1~0.7)C-3Mn-5Al lightweight steels
Sohn, Seok Su / Lee, Byeong-Joo / Lee, Sunghak / Kwak, Jai-Hyun et al. | 2015digital version print version
- 43
-
Microstructural analysis of cracking phenomenon occuring during cold rolling of (0.1-0.7)C-3Mn-5Al lightweight steels
Sohn, Seok Su / Lee, Byeong-Joo / Lee, Sunghak / Kwak, Jai-Hyun et al. | 2015print version
- 54
-
Fracture criterion for AZ31 Mg alloy plate at elevated temperature
Seok, Dong-Yoon / Kim, Daeyong / Kim, Sang-Woo / Bak, Jeonghwan / Lee, Young-Seon / Chung, Kwansoo et al. | 2015digital version print version
- 72
-
Grain refinement of Al-Mg-Sc alloy by ultrasonic treatment
Tuan, N. Q. / Puga, H. / Barbosa, J. / Pinto, A. M. P. et al. | 2015digital version print version
- 79
-
Effect of C content on the microstructure and tensile properties of lightweight ferritic Fe-8Al-5Mn-0.1Nb alloy
Zargaran, A. / Kim, H. S. / Kwak, J. H. / Kim, Nack J. et al. | 2015digital version print version
- 85
-
Characterisation of microstructure, texture and mechanical properties in ultra low-carbon Ti-B microalloyed steels
Shukla, R. / Ghosh, S. K. / Chakrabarti, D. / Chatterjee, S. et al. | 2015digital version print version
- 96
-
Electrophoretic deposition and characterization of HA/chitosan nanocomposite coatings on Ti6Al7Nb alloy
Moskalewicz, Tomasz / Kot, Marcin / Seuss, Sigrid / Kędzierska, Aleksandra / Czyrska-Filemonowicz, Aleksandra / Boccaccini, Aldo R. et al. | 2015digital version print version
- 104
-
Investigation on the mechanism of grain refinement in aluminum alloy solidified under ultrasonic vibration
Jiang, R. P. / Li, X. Q. / Zhang, M. et al. | 2015digital version print version
- 109
-
Grain refinement of AA5754 aluminum alloy by ultrasonic cavitation: Experimental study and numerical simulation
Haghayeghi, R. / Ezzatneshan, E. / Bahai, H. et al. | 2015print version
- 118
-
Improvement of the decarburization rate in austenitic stainless steelmaking
Kang, Youngjo / Kim, Yong Hwan / Sohn, Ho-Sang et al. | 2015digital version print version
- 126
-
Effect of basicity and B2O3 on viscosity, melting and crystallization behaviors of low fluorine mold fluxes for casting medium carbon steels
Zhou, Lejun / Wang, Wanlin / Lu, Boxun / Wen, Guanghua / Yang, Jian et al. | 2015digital version print version
- 134
-
Comparative study of microstructure and texture of cast and hom*ogenized TX32 magnesium alloy after hot deformation
Dharmendra, C. / Rao, K. P. / Prasad, Y. V. R. K. / Hort, N. / Kainer, K. U. et al. | 2015digital version print version
- 147
-
Nickel aluminides coating on aluminum substrate using a reaction synthesis process
Lee, Han-Young / Kim, Gun-Young et al. | 2015digital version print version
- 153
-
Microstructural evolution in semisolid forging of A356 alloy
Kang, Byung Keun / Hong, Chun Pyo / Choi, Byoung Hee / Jang, Young Soo / Sohn, Il et al. | 2015digital version print version
- 159
-
Rapid formation of Ti oxycarbide on the surface of Ti induced by electro-discharge-heat-treatment in a low vacuum atmosphere
Jo, Y. J. / Kim, Y. H. / Jo, Y. H. / Seong, J. G. / Ko, Y. K. / Kim, S. B. / Chang, S. Y. / Lee, W. H. et al. | 2015digital version print version
- 166
-
Solvent extraction separation of Zr and Hf from nitric acid solutions by PC 88A and its mixture with other extractants
Wang, Lingyun / Lee, Hwayoung / Lee, Manseung et al. | 2015digital version print version
- 173
-
Effect of preceramic and Zr coating on impregnation behaviors of SiC ceramic composite
Jung, Yang-Il / Kim, Sun-Han / Kim, Hyun-Gil / Park, Jeong-Yong / Koo, Yang-Hyun et al. | 2015digital version print version
- 179
-
Low-temperature synthesis and characterization of Ti2AlC/TiAl in situ composites via a reaction Hot-Pressing Process in the Ti3AlC2-Ti-Al system
Ai, Taotao / Yu, Ning / Feng, Xiaoming / Xie, Niansuo / Li, Wenhu / Xia, Pengju et al. | 2015digital version print version
- 185
-
Enhancement of the in-plane shear properties of carbon fiber composites containing carbon nanotube mats
Kim, Hansang et al. | 2015digital version print version
- 194
-
Reduction of initial corrosion rate and improvement of cell adhesion through surface modification of biodegradable Mg alloy
Han, Hyung-Seop / Lee, Sun Hee / Kim, Won-Joo / Jeon, Hojeong / Seok, Hyun-Kwang / Ahn, Jae-Pyung / Kim, Yu-Chan et al. | 2015digital version print version
- 202
-
Phase transformation and its effect on mechanical characteristics in warm-deformed Ti-29Nb-13Ta-4.6Zr alloy
Lee, Taekyung / Nakai, Masaaki / Niinomi, Mitsuo / Park, Chan Hee / Lee, Chong Soo et al. | 2015digital version print version
- 208
-
Hydriding and dehydriding rates of Mg, Mg-10TaF5, and Mg-10NbF5 prepared via reactive mechanical grinding
Song, Myoung Youp / Kwak, Young Jun / Lee, Seong Ho / Park, Hye Ryoung et al. | 2015digital version print version